ACQUITY UPLC Peptide Columns

ACQUITY UPLC Peptide BEH C₁₈, 130Å or 300Å Columns offer a wide usable pH range and outstanding temperature stability for applications ranging from proteomics to peptide mapping. ACQUITY UPLC CSH C₁₈, 130Å Peptide Columns with a low-positive charged surface can be used with standard TFA-containing eluents or with a weaker acid modifier such as formic acid, eliminating the need to compromise between a reversed-phase eluent that delivers sharp peaks or one that minimizes reduction of the MS signal.

The Peptide HSS T3, 100% silica-based particle offering is the ideal choice for the separation of small, hydrophobic peptides since retentivity is greater than that obtained using either of Waters BEH or CSH, hybrid-based peptide separation columns. Columns containing XSelect Peptide HSS T3, 2.5 µm XP or 5 µm particles are also available for UHPLC or HPLC-based applications.

Learn More

XBridge Peptide BEH Columns

XBridge Peptide BEH C₁₈ Columns offer a wide usable pH range and outstanding temperature stability for applications ranging from proteomics to peptide mapping. These HPLC-based columns are ideally suited for reversed-phase chromatography of a wide range of peptides including large and small, acidic and basic, and hydrophilic and hydrophobic species. These columns are available in 130Å and 300Å pore size offerings that provide different separation selectivities for use with challenging samples.

Learn More

XSelect Peptide CSH Columns

Charged Surface Hybrid (CSH) Particle Based, Peptide Columns. Outstanding peptide mass loading capability that maintains high peak capacities using either 0.1% FA- or 0.1% TFA-containing eluents. Best suited for compounds less than 10,000 Daltons and delivers different separation selectivity than seen on BEH C18, 130A material. Scalable 1.7 μm, 3.5 μm, 2.5 μm XP, and Prep 5 μm that address application needs. Specifically QC tested with tryptic digests of cytochrome c using 0.1% FA-containing eluent to ensure column-to-column consistency in validated methods.

Learn More

Peptide Separation with nano- and microflow LC-MS

Microflow LC-MS for peptide identification is greatly simplified with the 150 µm iKey Separation device due to plug-and-play design and fitting-less fluid connections. The iKey offers an up to 40x increase in sensitivity compared to 2.1mm ID UPLC.

Learn More

For nanoflow LC-MS peptide bioanalysis, ACQUITY UPLC M-Class Columns are specifically designed for low dispersion nano LC.  The nano- to microscale LC-MS ACQUITY UPLC M-Class Columns and trap columns enable nano- and microscale separations under UPLC conditions at 15,000 psi, fully leveraging the separation power of sub-2-µm particle technology.

Learn More

BioSuite Columns

BioSuite C₁₈, 100A, 3 μm PA-A Column

• Specifically designed for excellent retention of polar peptides
• Excellent performance in traditional HPLC separations using low TFA concentrations (e.g., 0.025% TFA) 

BioSuite C18, 300A, 3.5 µm PA-B Column

• Outstanding performance in separating digests containing hydrophilic, hydrophobic, and basic peptides
• Superior peak shape and capacity for peptide separations using TFA (e.g., 0.1% TFA)
• Good choice for separation of large peptide fragments (e.g., Lys-C digests)

Learn More

Symmetry Columns

Symmetry, reversed-phase, silica-based particles are synthesized using ultrapure organic reagents, resulting in high purity material with very low silanol activity. When combined with the high surface coverage of the bonded phase, outstanding peptide separations and recoveries are possible.

• Superior manufacturing control for consistent batch-to-batch and column-to-column results
• 100Å and 300Å pore size offerings for small or larger size peptides
• SymmetryShield Column chemistry offers complementary selectivity to Symmetry Column offerings
• SymmetryPrep Columns provide direct scale up while maintaining resolution

Learn More

Delta-Pak HPLC Columns

Delta-Pak HPLC Columns are based on highly stable, bonded, endcapped 5 μm or 15 μm spherical 100% silica-based particles.  These columns are offered in two different pore sizes -- 100Å or 300Å -- with either C₄ or C₁₈ ligands to address different selectivity and retentivity needs. They are available in different 15 μm cartridge and column configurations, providing consistent and predictable scale-up capabilities for milligram-to-gram scale purification. The same chemistry is also available in higher-resolving 5 µm particles, making it possible to easily check the purity of isolated fractions collected from purification chromatography.