Atmospheric Solids Analysis Probe : Waters

Waters offers a comprehensive range of analytical system solutions, software, and services for scientists. Liquid Chromatography. Mass Spectrometry. Waters is the leading provider of lab equipment, supplies and software for scientists across the world. Easily research and order everything your lab needs! Waters offers a comprehensive range of analytical system solutions, software, and services for scientists. Liquid Chromatography. Mass Spectrometry. Waters is the leading provider of lab equipment, supplies and software for scientists across the world. Easily research and order everything your lab needs!

Rapid Direct Analysis of Volatile and Semi-Volatile, Solid and Liquid Samples

The Atmospheric Solids Analysis Probe* (ASAP) (introduced by McEwan et al) is a useful tool for the rapid direct analysis of volatile and semi-volatile, solid and liquid samples using atmospheric pressure ionization.

The ASAP technique utilizes the heated nitrogen desolvation gas to vaporize the sample and a corona discharge for sample ionization. This allows low polarity compounds not amenable to ESI, APcI and APPI to be ionized with a high degree of sensitivity. Furthermore complex mixtures can be analyzed without the need for any sample preparation.

產品 | 價格

Buy Now

Sensitivity and Safety by Design

The Waters Atmospheric Solids Analysis Probe is readily fitted to a standard API source by replacing either the ESI or APCI probe assembly. A corona discharge pin also requires fitting. The close proximity of the sample, when loaded onto a glass capillary tube, to the point of ionization and the MS inlet, improves sensitivity while also ensuring safety due to the enclosed source housing.

Instruments are operated in combined Electrospray/APcI mode (ESCi^®). This provides for the acquisition of both analyte data in APcI mode and reference data in electrospray mode, enabling exact mass measurements to be produced.

The probe is designed to have both fixed and removable sections to allow rapid sample introduction without removal of the complete assembly ensuring stable source conditions.

*Waters Atmospheric Solids Analysis Probe (ASAP) has been developed under license to M&M Mass Spec Consulting LLC, Hockessin, Delaware, USA (patent pending)

Equipment and Installation

The Atmospheric Solids Analysis Probe accessory comprises the probe body with removable sample insertion probe assembly, corona pin, glass sample capillaries, and operator's guide. Additional software (included) is also required for selected instruments.

There are two versions of probe, depending on the design of the instrument's API source assembly.

The probes are user-installable^#. However engineer installation and operation confirmation and training is available and recommended.

#Early Xevo™ TQ MS instruments may require new firmware.

Instrument Compatibility

The Atmospheric Solids Analysis Probe is compatible and supported with the following instruments:

ACQUITY^® SQD/TQD
SQ Detector 2/Xevo TQD
Xevo TQ MS, Xevo TQ-S, Xevo TQ-S micro
Xevo G2 Tof, Xevo G2-S Tof, Xevo G2-XS Tof
Xevo G2 QTof, Xevo G2-S QTof, Xevo G2-XS QTof
(MALDI) SYNAPT G2 MS, (MALDI) SYNAPT G2 HDMS
(MALDI) SYNAPT G2-S MS, (MALDI) SYNAPT G2-S HDMS
(MALDI) SYNAPT G2-Si MS, (MALDI) SYNAPT G2-Si HDMS

現在就想下單訂購？

攀登效能高峰。

善用MaxPeak Premier管柱消除疑慮。

輕鬆克服PFAS分析帶給您的挑戰。

您需要什麼資訊？

線上建立報價單

立即索取報價

您需要什麼資訊？

Atmospheric Solids Analysis Probe

Rapid Direct Analysis of Volatile and Semi-Volatile, Solid and Liquid Samples

Sensitivity and Safety by Design

Equipment and Installation

Instrument Compatibility

聯絡沃特斯

Waters品牌

產品

應用焦點

購物

公司