质谱升级

沃特世为您提供一系列的MS硬件升级和样品导入选件,这些将有效的改进您的系统控制与数据采集功能,同时也加强仪器分析能力并延长仪器使用寿命。

以下是适用于沃特世各种型号的质谱仪的仪器升级、转换、源入口选件目录。


APGC v2.0 Increase the analytical capabilities and productivity of your APGC enabled Waters Mass spectrometer by converting to APGC v2.0.
Spatial Resolution Upgrade Replace your existing laser 200Hz or 1 KHz laser with a 2.5KHz high repetition rate solid state laser system, offering a smaller spot size (avg 60µm) and reduced ablation times for MALDI Imaging experiments.
SYNAPT MS series - HDMS upgrade Upgrade your SYNAPT™ MS series instrument to full HDMS™ capability to benefit from high efficiency ion mobility separations.
MALDI Source: SYNAPT G2 MS/HDMS series instruments SYNAPT G2 MS/HDMS™ series instruments upgraded with a MALDI source system provide the uncompromised exact mass characterization of compounds using MALDI-MS, MALDI-MS/MS, and MALDI-MS/IMS/MS (HDMS only) analyses.
ionKey UPLC 微流离子源升级 ionKey UPLC微流离子源可通过简便易用的非分流iKey分离装置提升灵敏度、定量能力、最低检测限。
Electron Transfer Dissociation (ETD) Upgrade When analyzing post-translational modifications and top-down sequencing of Biomolecules are all important, Electron Transfer Dissociation (ETD) provides a unique solution.
NanoLockSpray Exact Mass Ionization Source The NanoLockSpray™ dual electrospray ion source accessory with optimized co-introduction of analyte and lock mass compounds provides authenticated exact mass measurement in NanoFlow™ LC/MS and LC/MS/MS modes of operation.
Atmospheric Pressure GC Source The Atmospheric Pressure GC (APGC) source field upgrade allows laboratories to extend the capabilities of their LC-MS analytical instrumentation, by incorporating the ability to perform AP GC-MS on a single MS platform.
大气压固体分析探头(ASAP) 大气压固体分析探头(ASAP)是一种利用大气压电离快速直接地分析挥发性和半挥发性、固体和液体样品的有效工具。ASAP技术采用加热的氮气脱溶剂使样品汽化,然后利用电晕放电实现样品电离。因此,可对ESI无法电离的低极性化合物进行高灵敏度的电离。此外,无需任何样品制备步骤,即可分析复杂混合物。
Edwards XDS Dry Vacuum Scroll Pump Conversion Provides a clean, dry, and lubricant-free vacuum and environmentally superior alternative to the standard oil-sealed rotary vacuum pump.
IonSABRE APCI Probe Accessory APCI is an effective method for analyzing lower-polarity compounds. The high-efficiency IonSABRE™ APCI probe offers significant improvements in sensitivity compared with earlier versions of probe, particularly at higher liquid flow rates.
LockSpray精确质量数电离源 LockSpray双电喷雾离子源可将分析物和校准化合物的混合进样优化为分别直接进样到离子源中,从而在MS和MS/MS模式下进行经验证的精确质量数测量,
`
返回顶部 返回顶部