The TargetLynx™ Application Manager automates sample data acquisition, processing and reporting for quantitative results. It incorporates a range of confirmatory checks that identify samples that fall outside user-specified or regulatory thresholds.
Identify Non-compliant Samples
TargetLynx rapidly identifies and flags samples where:
- Analytes are above a specified maximum reporting level (MRL)
- Analyte confirmatory ion ratios are outside specified limits
- One or more analyte signal-to-noise ratios are below a defined value
- An analyte retention time or relative retention time is outside limits
- An analyte concentration is below set LOD and LOQ thresholds
- The standard deviation of response for QC standards exceeds a defined value
- The blank response is too high
- The coefficient of determination (r2) of the calibration curve exceeds a defined value
LC/MS & LC/MS/MS and GC/MS & GC/MS/MS
Use TargetLynx to quantify and confirm both LC/MS & LC/MS/MS and GC/MS & GC/MS/MS data. This data may be selected ion monitoring (SIM), multiple reaction monitoring (MRM), or full scan/full spectrum. In the case of full scan/spectrum data, extracted ion chromatograms are used for quantification.
Ensure Regulatory Compliance
The demand by regulatory authorities for assurance of confirmation in quantitative analysis continues to increase. To ensure cost-effective compliance, TargetLynx offers software that gives you confidence in your results and eliminates time-consuming, costly manual checks.
